Hinged Doors

Hinged Doors

Hinged door mainly includes four parts as below:

Steel structure

Middle and surrounding frame is mainly built up by No.10 channel steels which are welded together. Appropriate measure will be taken to control the welding deformation of steel structure and ensure the size precision and flatness.

Decoration coating

Steel structure will be covered with PVDF painting. Anti-corrosion processing will be the same with that applied on the steel structure.

Outer steel sheet will be 4mm thick steel sheet with good rigidity. The outer steel sheet will be connected with the steel structure by plug welding.

Sealing system

Top and bottom sealing and the sealing between the door panels shall be made from fiber reinforced EPDM which are free from crack and breach due to long time folding.

Control system

Main control parts include local switch box, loop coil, and photo sensors. Logic control is made by PLC. Export driving parts include frequency inverter, motor and hydraulic driving system.

Supervisory control panel and control board could be installed in a remote control room. Driving power, controller, frequency inverter, mode selection switch (auto/manual), operation switch (open, close, stop), and interlock switch to each door are included in the control panel. Through the panel the operator could select between auto/manual modes, control each door, receive the status signal of each door, and indicate the current situation of each door (door failure, obstacle, loop coil failure, etc).

Function selection switch (local/auto/control room) is included in local control panel. When ” control room” is selected, door operating include open, close and stop will be controled from control room.

 

Other options

Daylighting windows could be arranged upon request.

 

Personnel door could be arranged upon request.

Remote control function from overhead crane operator could also be satisfied upon request.

 

Parameters of hinged door and driving system

 

Name

Hinged door and driving system

Type

Hinged door, 2 leaves

Location

Indoor

Qty

8 Sets

Clear opening

Height

6000 mm

Width

5000 mm

Main mtl

Carbon steel

Door panel

5.0mm

Time period

Open

? 15 sec

Close

? 15 sec

Operation

 

Could be controlled locally/from control room/from overhead crane operator

Self control

Embedded loop coil and infra red sensor

Driving

Type

Hydraulic

Qty

8 sets (one for each door)

Speed

50 mm/sec

Motor

Type

  F grade insulation

Temperature rising: grade B

Power

380 V?50 Hz

Start-up

Frequency convertible, voltage convertible

         

 

 

 

Product Origin: Shenyang
Model Number:  
Brand Name: Baotong
   
   

Contact Us

Company Name: Shenyang Baotong Door Co., Ltd.
Contact Person: Lisa Zhang
Address: No.7, Shiji Road, Hunnan District
Zip: 110179
Telephone: 86-024-23786011
Fax: 86-024-23786022
E-mail: sym094@163.com
Website: http://baotongdoors.tradeee.com

Send Inquiry

Your Name:
Email:
Your Company:
Country/Area:
Content:
CAPTCHA:
CAPTCHA Image Load new image