Selling Leads

Round- the-corner Door

Round- the-corner Door

  Outer face: color steel polyester sandwich panel, the outer and inner panels shall be 0.5mm thick color steel sheets with 50mm polyurethane insulation panel in the middle. Door structure: The channel of leaf shall be 4mm thick steel sheet. There ’ s strengthen square tube inside the door leaf. Both the guide and the bottom track shall be...

Fabric Lifting Hangar Door

Fabric Lifting Hangar Door

  General Information The lift door is a kind of door made of soft fabric which is divided into two layers. The connections between the fabric are aluminum made crossbeam. The door lifts vertically with the motive guide track, which can be used in the conditions where the top beam of opening has different layers and not in the same line. This door is installed inside of...

Sliding Industrial Door

Sliding Industrial Door

Steel motorized sliding doors. They could be bottom rolled/ top hung, electrical/ manual controlled, with various choice on cladding material, glazing area and material, appearance colors and safety protection. The door could fit in various size of openings.

Fabric Lifting Industrial Door

Fabric Lifting Industrial Door

Steel/ aluminium made frames coated with high-strength PVC coated polyester fabric. The fabric will fold up on both sides of the door when the door lift up. The door is the lightest in weight comparing with other types of doors and could provide almost full opening size. The PVC coating is water-proof and flame-proof. By using mobile intermediate tracks, the fabric lifting door could suit...

Vertical Bi-Folding Door

Vertical Bi-Folding Door

  The door is built up by 2 door panels, the door opening mechanism is installed on the bottom panel. During opening, the motor drives the roller on the transmitting shaft, and the lifting belts winded on the roller will open the door. Vertical doors are suitalbe for wide openings, especially for the building where there is no enough room on the top and sides of the door. This type of...

Aircraft Docking Systems

Aircraft Docking Systems

  Aircraft docking systems are special working platform fitted around the aircraft and make it easy for maintainers to get any place of the aircraft. According to different service areas, the aircraft docking systems usually include nose docks, tail docks, fuselage docks and wing docks, etc.. Regarding different aircraft types, the structures of docking systems including numbers of...

Guillotine Hangar Door

Guillotine Hangar Door

  Brief Introduction The door is built up by multiple door panels and balanced by counter weight. Suitable for frequent use and bad working condition under which maintenance is not convenient. The door panel is strong and good at withstanding impacting, which guarantee the safety and reliability. Available control method include manual, electrical and...